Interactive curl installation

README.MD

@@ -34,16 +34,32 @@ A lightweight Linux tool that monitors **SATA HDD temperatures**, sends **Discor
 **Quick Install with Curl**
 
 ```bash
-curl -fsSL https://git.djeex.fr/Djeex/hotdisk/raw/branch/main/sh/hotdisk_curl_install.sh | bash
+curl -fsSL https://git.djeex.fr/Djeex/hotdisk/raw/branch/main/sh/hotdisk_curl_install.sh | bash && sudo /usr/local/bin/install_hotdisk.sh
 ```
 
+This single command will:
+1. Download all scripts to `/usr/local/bin/`
+2. Run interactive installation with full customization prompts
+
+**Alternative Installation Options:**
+
+- **Download only**: `curl -fsSL https://git.djeex.fr/Djeex/hotdisk/raw/branch/main/sh/hotdisk_curl_install.sh | bash`
+- **Install after download**: `sudo /usr/local/bin/install_hotdisk.sh`
+
 The installer will:
 
-- Prompt for configuration: max temperature, cooldown, Discord webhook, log file, logrotate settings.
-- Check and install missing dependencies.
-- Generate logrotate configuration.
-- Install and enable systemd service + timer.
-- Run HotDisk immediately for testing.
+- Download and install all scripts to `/usr/local/bin/`
+- Check dependencies (smartmontools, curl, systemd)
+- Create configuration with defaults or prompt for custom values
+- Generate logrotate configuration for automatic log management
+- Install and enable systemd service + timer for continuous monitoring
+- Run HotDisk immediately for testing
+
+**Post-Installation (Non-Interactive Mode):**
+```bash
+sudo nano /etc/hdd_temp_monitor.conf  # Set your Discord webhook URL
+sudo systemctl restart hotdisk.timer   # Restart service with new config
+```
 
 **Check Logs**
 
@@ -73,10 +89,21 @@ Configuration is stored in `/etc/hdd_temp_monitor.conf` and is created by the in
 
 ## ❓ How it works
 
-1. The script reads SMART temperature for all SATA disks every minute.
-2. Counts consecutive minutes above/below threshold.
-3. Sends Discord notifications if threshold exceeded or cooled.
-4. Initiates system shutdown if temperature exceeds limit for configured duration.
-5. Logs all temperatures and counter states, rotates logs automatically.
+**Installation Process:**
+1. Downloads scripts to `/usr/local/bin/` (hotdisk.sh, hotdisk_logger.sh, install_hotdisk.sh)
+2. Detects if running interactively and prompts for configuration or uses defaults
+3. Creates `/etc/hdd_temp_monitor.conf` with monitoring settings
+4. Sets up systemd service (`hotdisk.service`) and timer (`hotdisk.timer`)
+5. Configures automatic log rotation via logrotate
+6. Enables and starts the monitoring service
+
+**Monitoring Process:**
+1. Runs every minute via systemd timer
+2. Discovers all SATA disks (excludes NVMe) using `lsblk` and `smartctl`
+3. Reads temperature for each disk via SMART attributes
+4. Tracks consecutive minutes above/below threshold in persistent state file
+5. Sends Discord notifications for temperature warnings and cool-downs
+6. Initiates safe system shutdown if critical temperature duration exceeded
+7. Logs all temperature readings with timestamps for analysis
 
 

sh/hotdisk_curl_install.sh

@@ -21,4 +21,7 @@ for script in "${SCRIPTS[@]}"; do
     fi
     run_as_root chmod +x "/usr/local/bin/$script"
 done
-run_as_root /usr/local/bin/install_hotdisk.sh
+
+echo ""
+echo "📦 Scripts downloaded successfully to /usr/local/bin/"
+echo "🔧 Run installation with: sudo /usr/local/bin/install_hotdisk.sh"

sh/install_hotdisk.sh

@@ -34,7 +34,25 @@ if [ ${#MISSING[@]} -ne 0 ]; then
     exit 1
 fi
 echo "✅ All dependencies are installed."
-read -p "Maximum temperature (°C) before shutdown [60]: " MAX_TEMP
+
+# Check if running interactively
+if [[ ! -t 0 ]] || [[ ! -t 1 ]]; then
+    echo "⚠️  Non-interactive mode detected. Using default values."
+    echo "To customize settings, run: /usr/local/bin/install_hotdisk.sh"
+    MAX_TEMP=60
+    HOT_DURATION=5
+    COOL_RESET_DURATION=5
+    LOG_FILE="/var/log/hdd_temp_monitor.log"
+    LOG_ROTATE_COUNT=7
+    LOG_ROTATE_PERIOD="daily"
+    echo ""
+    echo "⚠️  IMPORTANT: You must set your Discord webhook URL manually!"
+    echo "Edit /etc/hdd_temp_monitor.conf and add:"
+    echo "DISCORD_WEBHOOK=https://discord.com/api/webhooks/YOUR_WEBHOOK_URL"
+    echo "Then restart the service: sudo systemctl restart hotdisk.timer"
+    DISCORD_WEBHOOK="https://discord.com/api/webhooks/CHANGE_THIS"
+else
+    read -p "Maximum temperature (°C) before shutdown [60]: " MAX_TEMP
 MAX_TEMP=${MAX_TEMP:-60}
 if ! [[ "$MAX_TEMP" =~ ^[0-9]+$ ]] || [[ $MAX_TEMP -lt 1 || $MAX_TEMP -gt 100 ]]; then
     echo "ERROR: MAX_TEMP must be a number between 1-100" >&2
@@ -69,17 +87,18 @@ if [[ ! "$LOG_ROTATE_PERIOD" =~ ^(daily|weekly)$ ]]; then
     echo "ERROR: LOG_ROTATE_PERIOD must be 'daily' or 'weekly'" >&2
     exit 1
 fi
-echo "Paste your Discord Webhook URL here."
-read -p "Discord Webhook URL: " DISCORD_WEBHOOK
-if [[ -z "$DISCORD_WEBHOOK" ]]; then
+    echo "Paste your Discord Webhook URL here."
+    read -p "Discord Webhook URL: " DISCORD_WEBHOOK
+    if [[ -z "$DISCORD_WEBHOOK" ]]; then
         echo "ERROR: Discord Webhook cannot be empty" >&2
         exit 1
-fi
+    fi
 
-# Validate Discord webhook URL format
-if [[ ! "$DISCORD_WEBHOOK" =~ ^https://discord(app)?\.com/api/webhooks/ ]]; then
+    # Validate Discord webhook URL format
+    if [[ ! "$DISCORD_WEBHOOK" =~ ^https://discord(app)?\.com/api/webhooks/ ]]; then
         echo "ERROR: Invalid Discord webhook URL format" >&2
         exit 1
+    fi
 fi
 echo ""
 echo "Please confirm:"
@@ -90,8 +109,13 @@ echo "LOG_FILE=$LOG_FILE"
 echo "LOG_ROTATE_COUNT=$LOG_ROTATE_COUNT"
 echo "LOG_ROTATE_PERIOD=$LOG_ROTATE_PERIOD"
 echo "DISCORD_WEBHOOK=$DISCORD_WEBHOOK"
-read -p "Is this correct? (y/n): " CONFIRM
-[[ ! "$CONFIRM" =~ ^[Yy]$ ]] && { echo "Aborted"; exit 1; }
+
+if [[ -t 0 ]] && [[ -t 1 ]]; then
+    read -p "Is this correct? (y/n): " CONFIRM
+    [[ ! "$CONFIRM" =~ ^[Yy]$ ]] && { echo "Aborted"; exit 1; }
+else
+    echo "Proceeding with installation..."
+fi
 run_as_root tee "$CONFIG_FILE" > /dev/null <<EOF
 MAX_TEMP=$MAX_TEMP
 HOT_DURATION=$HOT_DURATION